Trace Alchemy
Video and animations
Trace a video or an animated GIF into a sequence of laser frames.
A video or an animated GIF becomes one laser frame per video frame. The settings on every tab apply to all the frames; the view traces the frame you're looking at.
Open a video
- Open an AVI, MPEG (
.mpg,.mpeg), MJPEG or DivX file, or an animated GIF, as any other file. Loading shows progress; Cancel stops it. - Tune the settings on one typical frame, then check a few others with the frame slider.
- Click Play to watch the trace move. It plays at about 30 frames a second.
MP4 and MOV files don't open: convert the clip to MPEG or AVI first, trimmed to the part you need.
Tracing every frame
Only the frame in the view is traced while you work. The rest are traced when you export or publish: the Export tab shows Frames converted: N out of M, and changing a setting starts again. A long clip at a careful setting can take a while, so settle the settings before exporting.
An ILDA file holds at most 65,535 frames, about 36 minutes at 30 frames a second.
Keep a traced video steady
Each frame is traced on its own. Small differences between frames, such as noise, compression blocks and soft shading, make lines appear, vanish and wobble from one frame to the next, which reads as shimmer on the laser.
- Start from clean footage: high contrast, flat colours, a plain background. Silhouettes and line-art animation trace best.
- Raise Despeckling Level and Noise Removal so specks don't come and go.
- Reduce colours and raise Edge Contrast so shading doesn't split into shifting areas.
- Use the Threshold Filter to drop faint background detail.
- Loosen the fit (higher Break threshold, more Pre-Fit smoothing passes) so tiny corners don't flicker on and off.
- Keep Max Number of Points comfortably above what most frames need. Frames that go over it are simplified, each by a different amount, and the detail jumps between them.
Scrub through the whole clip and watch Laser: in the status bar: a frame whose count jumps is usually one that will shimmer.
Play it in Live Alchemy
The exported file becomes a frame stack in Live Alchemy, played by the Animation generator, which sets how fast the frames run. See Export and use in Live Alchemy.