Routing
DACs
Find your DACs and give each projector one.
A DAC is the box (or network device) that turns Live Alchemy's points into the signal a laser projector takes. Each projector needs one. Find and assign them in the DACs table on the Projectors tab.
Turn on your DAC types
Live Alchemy only looks for the DAC families ticked under Hardware in General settings: IDN, EtherDream, Helios, LaserCube USB, LaserCube Net, Dynamics, RayComposer, Beyond, Audio DAC. Untick the ones you don't use. Changes need a restart.
Scan
Click Scan. Live Alchemy also scans at startup.
A scan disconnects every DAC, looks for them again, then reconnects each projector to the DAC it had (matched by its identity, not its place in the list).
Assign a DAC
- Select a projector in the Projectors table.
- Select a DAC in the DACs table.
- Click the arrow that points to the projector. The projector's Plugged DAC column shows it.
The other arrow frees the projector's DAC. A DAC feeds one projector, and a projector takes one DAC: free a projector before giving it another DAC.
Assignments are saved in the workspace. When the workspace opens on the same rig, each projector finds its DAC again. Without a valid licence or trial the assign arrows and Auto-configure do nothing; see Licence and account.
Auto-configure
Auto-configure gives the first DAC to the first projector, the second to the second, and so on, adding projectors if there are more DACs than projectors. It replaces existing assignments and never assigns Video DACs.
Use it on a new workspace. On a rig you have already set up, assign by hand so each DAC goes to the projector whose zones match where that laser stands.
Virtual DACs
These appear in the table like hardware, once turned on under Hardware (they need a licence that includes them):
| DAC | What it does |
|---|---|
| Depence Visualizer | Streams the projectors' output to Depence² for previsualisation |
| LaserViz | Streams to LaserViz headsets |
| Video DACs | Draw the laser picture on a video projector or display. See Video DACs |
A warning icon on a Video DAC row means its display needs relinking.
When a DAC is missing
- Check that its type is ticked under Hardware, and restart after changing it.
- Network DACs: the computer and the DAC must be on the same network.
- Scan again. See Troubleshooting.