Trace Alchemy
Troubleshooting
Fixes for traces that vanish, run slow, flicker or come out invisible on the laser.
Fixes by symptom, roughly in the order to try them.
Nothing is traced, or the trace disappears
- The status bar says nothing found, try a lower Threshold Filter or Edge Contrast, or the picture turns black: lower the Threshold Filter (Media tab), then Edge Contrast (Trace tab).
- The artwork is taken for background, for example a white logo with Background on White: set Background to Auto or to the real background colour.
- An overlay mask covers it: Clear Masks on the Media tab.
- Tracing Failed on a very plain picture: lower Break threshold and Spline / straight threshold, and add Contrast.
Lines are invisible or dim on the laser
- Dark artwork on a light background traces into dark laser lines. Turn on Invert Colors (Media tab) so the artwork is light on black.
- Dark colours in the picture stay dark on the laser. Raise Brightness, or Gamma above 1 to lift the mid-tones.
- Lines are faint because the beam moves fast along them: shorten Visible Segment Length, or add Anchor Points.
The frame flickers, or has too many points
Cut shapes first, and lower the point budget last:
- Fewer shapes: fewer Number of Colors, more Despeckling Level, higher Edge Contrast or Threshold Filter.
- Centerline Mode for line art.
- A looser fit: higher Break threshold and Spline / straight threshold, Remove Adjacent Corners.
- On the Frame tab: Optimize Path, Simplify Segments, Join Adjacent Segments, a longer Visible Segment Length, fewer anchor points.
- A lower Max Number of Points. It coarsens the whole frame, so it comes last.
Tracing is slow, or is cancelled as too complex
- Scale a large picture down before opening it.
- Tracing Too Complex stops a trace that finds over 100,000 curves. Its advice uses older names: "Error Threshold" is Break threshold and "Line Threshold" is Spline / straight threshold. Reduce colours and raise Edge Contrast too.
- Cancel stops a long trace at any time.
Tails, stray lines or round corners on the laser
- A faint tail into the start of a line: more Blanked Points under Line Start Points, or a shorter Blanked Segment Length.
- A stray line between two shapes: lower Adjacent segment join threshold, or turn off Join Adjacent Segments.
- Rounded corners: more Corner Anchor Points, or a lower Min. Corner Angle (10-180).
A traced video shimmers
Each frame is traced on its own. See Keep a traced video steady.
A file doesn't open
- MP4 and MOV videos aren't supported: convert to MPEG or AVI.
- Drag one file at a time onto the window.
- A PDF or Illustrator file that fails says why in PDF Import Failed or Adobe Illustrator Import Failed.
Export or Publish asks for a licence
ILDA export and publishing need a Trace Alchemy monthly licence or any Live Alchemy licence. Click Sign in / Licence…, or see Licence.