
Live
Laser show software for people who perform and edit. Busk a set live from the pads, or build the show on a timeline locked to the DJ or the timecode, and render it for the road.
New to Live Alchemy? Read the user guide →
Live
Busk it .
Play the rig like an instrument. Fire cues from the pads, a controller or the lighting desk, with loops locked to the beat and effects on top.
Live pad previews
Every pad plays its cue live. Forty a page, unlimited pages.
Five trigger modes
Toggle, restart, duplicate, flash and solo flash.
Colour groups
Nine groups, each with its own trigger mode, lit on your controller.
Beat-locked loops
Loops follow the tempo: tapped, Clockworks, Link or MIDI clock.
Master effects on top
Reshape everything that’s playing, live.
Crossfader
Fade or morph into the next cue from a slider or fader.
Macros and endings
48 command buttons, and a beat-timed ending for the whole rig.
Record your set
Record, overdub and play back your pad and fader moves.
Fire it from anywhere
MIDI controllers
Ready-made profiles for the APC40 (mk1 and mk2) and Stream Deck, with the pads lit in their group colours.
DMX
Take DMX from the lighting desk over Art-Net, sACN or a USB interface, and map channels with learn mode.
OSC and UDP JSON
Drive Live Alchemy from tablets, show control and your own software.
Rec. 2020 colour correction
One colour,
The only laser show software that colour-corrects to Rec. 2020.
Live Alchemy maps each projector’s red, green and blue into Rec. 2020 (BT.2020), the wide colour gamut of UHD and HDR, with a D65 white. The same colour value then looks the same on every projector, as far as each can reach. A colour a projector can’t reach goes to the nearest one it can.
- Enter each laser’s wavelength and power from its spec sheet. No meter needed.
- Or type colorimeter x, y readings, or import a measurements CSV.
- Per-channel curves even out each laser, so a dim white stays white.
- Common gamut makes mixed projectors agree on every colour, with an optional brightness match.
- Off by default. Existing shows keep their look, and exports are never calibrated.
For film and TV
Lasers in the same colour space as the grade
Rec. 2020 is the colour standard behind UHD and HDR deliverables. Matching every projector to it puts the lasers in the same colour space the camera and the grade work in. Colour matching across projectors keeps a colour consistent from one laser to the next, on set and in shot.

Web zoning
Zone from your
Live Alchemy serves a zoning page on the local network. Open it on a phone, tablet or laptop next to the projector, and line up the rig where you can see it.
- Edit zone geometry, masks and Power Maps. The lasers follow every edit live.
- Several people can edit at once, each from their own device.
- Show test patterns, or mute every laser with Laser off.
- Arming stays in Live Alchemy. The page can never turn the lasers on.
- Nothing to install: it runs in the browser.
The page shows the zones, not the beams: watch the lasers as you work.
Set up web zoningThe Timeline
An NLE for
Arrange cues, effects and video on unlimited layers against the music’s waveform and beatgrid.
- Video compositing with 25 blend modes
- Group effects with effect tracks and nested timelines
- High-fidelity waveforms and adjustable beatgrids
- Keyframe a pattern once and repeat, bounce or stretch it on the beat grid
- Drag-and-drop cues, markers, cut, copy, paste and lock
- Export to a mixdown file or a show package
Sync
Locked to the
From DJ booths to theatre timecode, Live Alchemy follows whatever the show runs on.
Clockworks
The DJ’s BPM becomes the show tempo, each deck plays its own timeline in time, and the mixer blends them.
LTC, MTC and Art-Net timecode
Chase SMPTE timecode from the desk, the DAW or the network, with a start time per timeline.
Ableton Link
Join a Link session and share tempo and bar phase with music software.
MIDI clock, OSC and tap
Follow a MIDI clock, set the tempo over OSC, or tap it in.
Tempo that bends
Change BPM mid-show and every cue carries on from where it was, without jumping back to the start.
Beat-locked everything
Cues, effects and oscillators all run from one beat clock, so the whole rig stays in phase.
Output and visualisation
Every beam,
Real lasers, Pangolin BEYOND, Depence² and a headset, from the same show.
DACs, side by side
Ether Dream, Helios, LaserCube over USB and network, IDN, JMLaser and sound-card DACs, all in one show.
Pangolin BEYOND
Stream straight into BEYOND zones and the Pangolin hardware they drive. Already set up in BEYOND? Bring your zones across, geometry corrections included.
Zones and routing
Map content to zones and virtual zones, spread one look across projectors, and save setups as output templates.
Depence²
Feed every output into a Depence² scene to programme and present shows before you’re on site.
LaserViz on Apple Vision Pro
Put on the headset and see the show as volumetric beams in your room or a virtual venue, live.
3D preview
A real-time 3D beam preview inside Live Alchemy, so you can build a show with no lasers connected.
Content
Generate, draw,
Build looks from plugins and oscillators, or bring in the frames you already have.
Pluggable generators
Generators are plugins. Oscillator figures, shapes and text ship in the box; new ones drop into a folder.
Oscillators
Modulate any parameter with a beat-synced oscillator, each with its own waveform and envelope.
ILDA frames
Import the ILDA frames and animations you already own, and export cue tracks back to ILDA.
Effect chains
Stack effects on a cue, a zone or the whole output, with motion curves and presets throughout.
Presets
Save envelopes, effect chains, gestures and macros as presets and reuse them across shows.
Open files
XFB banks and JSON workspace and timeline files you can read, back up and version.
Paint Alchemy
Author your own
A full laser frame editor, built in. Draw in layers, trace images and build true 3D frames. An embedded MCP server lets an AI assistant draw alongside you.
Meet Paint AlchemyRender and play
Render offline.
The render queue turns timelines into files in the background while you keep working. Package them as shows and run them in the standalone Show Alchemy, locked to timecode.
Show Alchemy
Screenshot
Click any image to view it full size.
Where technology meets
$10 a month per DAC output, or $750 once for unlimited outputs.